Your shower is among the first places that you go in the morning and the last place you relax at the end of the day when in Dubai. Have you however ever thought of the water coming out of your showerhead when you are thinking of shampoo and body wash?
As a resident of Dubai, there is no doubt that you have heard people discussing the impact of hard water and chlorine on your hair and skin. And for that reason, a shower filter becomes an important item for every bathroom in your house.
What is great? Fitting a shower filter doesn’t require you to hire a plumber or make a change in the bathroom.
It is easy and quick with a universal shower filter such as Pureblue which is designed to work with both fixed and handheld showers.
In this article, we shall go through step by step on how to install a shower filter at your Dubai residence, what you will need and how to ensure that the process goes well.
Water is a very essential element in our daily lives. Every time that we take a bath, we interact with water coming from the shower.
The shower filters from Pureblue purify the water by removing the chlorine and other contaminants in the shower water. As stated by Pureblue, the shower filters remove up to 98 percent of chlorine and heavy metals in the water found in UAE and GCC countries.
It uses KDF 55 from the USA and calcium sulphate from Japan.
Although a shower filter is not a comprehensive water-softening solution, it may turn out to be a convenient point-of-use filtration solution for your bathroom.
In case you are someone who loves spending time on grooming and taking care of your hair and skin, getting a shower filter might help you in establishing a shower routine.
Universal shower filters have one advantage, in that they do not require any complex installations.
Before proceeding with installation, ensure that you have:
The Pureblue shower filter can be used on both fixed and handheld showers, due to its universal adaptors that will suit various showers.
In case your shower filter is not compatible with the shower at hand, ensure to follow the instruction guide for your filter before installation.
In cases where your shower has a very unique connection, damaged threads or plumbing, then seek professional help.
First, shut off your shower before you proceed.
For a regular installation of a shower filter, you will generally not have to shut off water from your entire house. Make sure that the shower itself is off during the process.
If you had your shower on previously, let the fittings cool down before proceeding.
Have a towel handy for wiping down any water from the connections.
The next step in the process would be unscrewing your existing showerhead or hose from which you will mount the water filter.
In case of a hand-held shower, the place of attachment should be between the hose that leads to the showerhead and the outlet for water or showerhead itself.
In case of a fixed shower, the attachment may be placed between the shower arm and the showerhead.
Remove the old fitting carefully by using an adjustable wrench without using too much force.
Take the Pureblue shower filter and observe the inlet and outlet connections.
There should be an inlet and an outlet in such a way that the water will pass through the filtration system as per the design.
Use the flow direction indicated by arrows on your Pureblue filter.
It is noted that the Pureblue filter has a universal installation design to facilitate installation of the shower filter in various types of showers, but the exact installation process may differ according to the individual setting in the bathroom.
Now it is time to connect the shower filter.
Depending on the type of installation, you should install the filter between the shower arm and the shower head or between the water outlet and the handheld shower hose.
Rotate the filter into place and screw it down manually.
Do not overtighten as this can cause damage to the threads or seals.
If you need to use an adaptor for the installation, use the suitable adaptor for your filter.
After connecting the filter, reconnect your shower head/handheld hose to the filter outlet.
Ensure that the connection is straight and aligned.
Tighten it with your hands first. Only use a wrench if necessary with a gentle amount of force.
The aim is to get a tight fit, not necessarily a very tight one.
Alignment of the connection can help reduce leakage and facilitate cartridge replacement.
After setting everything up, start the flow of water into the shower slowly.
Let water flow through the filter for as long as is recommended by your product’s instructions.
The process of flushing will help in preparing the filtration system.
Carefully check the connections when water is flowing.
Seek:
In case of any leakage, stop the water flow and check the connections. If required, align and secure the connections properly.
In case of any persistent leakage, check the seals and fittings or contact a plumber.
Now after installing the filter, it is time to check the flow of water from your shower head.
This particular filter is made in such a way that it will work perfectly well in your shower system if installed correctly, allowing water to pass through it.
Water flow may be reduced because of any of the following:
Low pressure does not necessarily mean that there is a problem with the filter. Other factors such as the showerhead, hose, and plumbing could be responsible for low flow.
If the problem persists, consult the installation guide or contact Pureblue for help.
To begin with, when dealing with a regular shower set-up that fits with the Pureblue filter, the filter is supposed to be easily installable.
This particular shower filter can screw on a regular shower unit and thus, suits many shower sets including fixed showers and hand-held showers.
Nonetheless, every bathroom connection may not be the same.
In the following situations, you will need a plumber:
Better be safe than sorry, so it is better to seek professional assistance rather than jeopardize your shower pipes.
How to Maintain Your Pureblue Shower Filter
Your work is not done just by installing the filter. As with any water-filtering appliance, the proper maintenance will help keep things under control during your showers.
Replace the Cartridge In Due Time
Replacing cartridges for Pureblue filters is easy due to their special design.
It will depend on the frequency of use and number of people in the family. One person can enjoy the shower filtration for up to 5-6 months.
Remember your installation date and stick to the replacement guidelines for your product.
Keep the Showerhead Clean
Limescale and deposits on the showerhead might influence water flow.
It may be useful to clean the showerhead on a regular basis to have water pressure at an optimal level.
When there is a change in water flow after the installation of a filter, clean the showerhead and hose first, and then consider the replacement of the cartridge.
Check for Leaks
Once in a while, inspect the filter connections.
In case there is leaking water, turn off the shower and examine the fittings.
Proper installation ensures proper functioning of the shower system.
Always Use Compatible Replacement Cartridges
The Pureblue replacement cartridges are compatible with Pureblue shower filters only.
Make sure to use the right replacement cartridges.
Otherwise, you will end up with problems with fitting and water flow in your filtration system.
It all depends on the usage.
Pureblue advises to replace cartridges:
| 1 person: | Upto 5-6 months |
| 2 persons: | Around 4 months |
| 3 persons: | Around 3 months |
They are merely approximate numbers. The real lifespan of the cartridge depends on the quantity of water filtered and your personal shower usage frequency.
The Pureblue cartridge can filter up to 40,000 liters, whichever comes earlier, either the amount of water or the recommended time of replacement.
Having an extra cartridge will save you from possible disruptions of your daily showering procedure.
Is the installation of the shower filter complex?
A regular compatible shower head is quite easy to install. Universal Pureblue filter works for both fixed and handheld showers.
Does Pureblue work on all showers?
According to the Pureblue company website, the universal adapters provided by the company fit handheld and rain showers. Verify your connection prior to purchase/installation.
Will the shower filter remove hard water?
Pureblue shower filters were developed with the intention of minimizing the content of chlorine and other contaminants in water, so it won’t be a water softener in most cases.
Does Pureblue remove chlorine?
Yes, according to the manufacturer’s claims, Pureblue eliminates up to 98% of chlorine and other contaminants from UAE and GCC water.
Am I able to replace the cartridge myself?
The replacement cartridges of Pureblue are specifically designed in order to facilitate their replacement. For detailed instructions, see your product manual.
How can I fix the leakage of my shower filter?
Shut down the water supply and make sure that all the connections are tight. In case the leakage continues, try checking the seals or consulting a plumber.
It is not difficult to install a shower filter in your Dubai apartment.
Because of the pure blue universal design, compatibility with fixed and hand-held showers and filtration technology based on KDF 55 and Japanese calcium sulphate, you can install point of use filtration without altering your entire shower system.
The installation process will be simple when making a connection to the existing shower head or shower hose by simply attaching the filter and reattaching your shower head.
After installation, it is important to ensure you service your filter, clean your shower head and change the cartridge when necessary.
Check out the Pureblue shower filters and replacement filters available at h2opureblue.com, and learn how easy it is to incorporate filtration into your regular shower experience.
Pureblue shower filters work to decrease chlorine and impurities, according to the specific filter used. They are not a surefire cure for any skin or hair ailments. Please consult the user manual regarding installation and replacement of filters.
